TPU hot melt glue sheet for insole

Short Description:

With or without paper without
Thickness/mm 0.015/0.02/0.025/0.03/0.035/0.04/0.05/0.1
Width/m/ 1.2m-1.52m as customized
Melting zone 70-125℃
Operating craft heat-press machine: 120-160℃  5-12s  0.4Mpa

Product Detail

Product Tags


It is a thermal PU fusion film with translucent appearance which is  normally applied at bonding of leather and fabric, and the field of shoe material processing, especially the bonding of Ossole insoles and Hypoli insoles. Some insole manufacturers prefer low melting temperature, while some prefer higher one. So we develop different temprature layers for customers to choose. This product is designed for customers needing  middle melting temprature. Normally it is 500m/roll and packed in bubble film and carton.


1. Soft hand feeling: when applied at insole, the product will have a soft and comfortable wearing.
2. Water-washing resistant: It can resist at least 10 times water-washing.
3. Non-toxic and environmental-friendly: It will not give off unpleasant smell and will not have bad influences on workers health.
4. Easy to process at machines and labor-cost saving: Auto lamination machine processing, saves labor cost.
5. High melting point: it meets the heat resistance requests.

Main application

PU foam insole
Hot melt adhesive film is widely used at insole lamination which is popular welcomed by customers because of its soft and comfortable wearing feeling. Besides,Replacing traditional glue sticking,hot melt adhesive film has became the main craft that thousands of shoes material manufacturers have been applied to for many years.

hot melt adhesive film for insole (2)
Hot melt adhesive film for insole
hot melt adhesive film for upper

Other  application

L349B hot melt adhesive film can also used at car mat,bags and luggage,fabric lamination 

hot melt adhesive film for car mat
hot melt adhesive film for bags and luggage1

  • Previous:
  • Next:

  • Related Products