PO

  • PO HOT MELT ADHESIVE FILM

    PO HOT MELT ADHESIVE FILM

    bonding metal materials, coating materials, fabrics, wood, aluminized films,aluminum honeycombs, etc. 1.good lamination strength: when applied at textile, the product will have a good bonding performance. 2.Non-toxic and environmental-friendly: It will not give off unpleasant smell and will not h...
  • PO hot melt adhesive film for embroidery patches

    PO hot melt adhesive film for embroidery patches

    It is a PO hot melt adhesive film coated on glassine double silicon release paper. textile fabric,cotton fabric,Almunimum board,Nylon fabric compounding. Compared with liquid glue bonding, this product behaves well on many aspects such as evironment relationship, application process and basic c...
  • PO hot melt adhesive film for embroidery patches

    PO hot melt adhesive film for embroidery patches

    https://www.hotmeltstyle.com/uploads/Hot-melt.mp4 It is a PO hot melt adhesive film coated on glassine double silicon release paper. textile fabric,cotton fabric,Almunimum board,Nylon fabric compounding. Compared with liquid glue bonding, this product behaves well on many aspects such as evironment ...
  • EAA hot melt adhesive film for aluminum

    EAA hot melt adhesive film for aluminum

    HA490 is a Polyolefin material product. Also this model could be defined as EAA. It is a translucent film with paper released. Normally people use the width of 48cm and 50cm with thickness 100 micron on refrigerator. HA490 is suitable for bonding various fabrics and metal materials, especially a...
  • PO hot melt adhesive film for  refrigerator evaporator

    PO hot melt adhesive film for refrigerator evaporator

    It is modified polyolefin hot melt film without basic paper. For some customers’ request and craft difference, hot melt film without paper released is also a welcomed product in the market. This specification is often packed at 200m/roll and filled in bubble film with paper tube dia 7.6cm. ...
  • PO hot melt adhesive film

    PO hot melt adhesive film

    https://www.hotmeltstyle.com/uploads/Hot-melt-adhesive-film.mp4 The peel strength test uses a 0.25mm adhesive film, peels off the release paper of the film, sandwiches it between two cotton cloths, presses it for 6-8 seconds at a temperature of 110-120℃, cools for 30 minutes, and then performs a peel ...
WhatsApp Online Chat !