EVA Hot Melt Adhesive Film

Short Description:

With or Without Paper	WIDTH/MM	WIDTH/M/as customized	MELTING ZONE	OPERATING CRAFT
				HEAT-PRESS MACHINE
Without	0.015~0.25	150cm,152cm, and other width can be made to order	55-110℃	1)Flat press machine Temperature: 150-170℃ Pressure: 0.4-0.6MPa Time: 8-10s 2)Complex machine Temperature: 160-180℃ Pressure: 0.4-0.6MPa Roll speed: 5-6 m/min

Send email to us

Product Detail

1)Flat press machine
Temperature: 150-170℃
Pressure: 0.4-0.6MPa
Time: 8-10s
2)Complex machine
Temperature: 160-180℃
Pressure: 0.4-0.6MPa
Roll speed: 5-6 m/min

L043 is suitable for lamination of microfiber and EVA chips, fabrics, paper, etc.
1.good lamination strength: when applied at textile, the product will have a good bonding performance.
2.Non-toxic and environmental-friendly: It will not give off unpleasant smell and will not have bad influences on workers health.
3.Easy application: The hotmelt adhesive film will be easier to bond the materials, and can save time.
4.It is a product which can be high temperature resistance, a special characteristic.
It is mainly used in the microfiber and EVA chips, fabrics, paper, etc.
This quality can also to kinds of textile idustry and other materials.