Super Lowest Price H&H Engraving - PO hot melt adhesive film – HH

The peel strength test uses a 0.25mm adhesive film, peels off the release paper of the film, sandwiches it between two cotton cloths, presses it for 6-8 seconds at a temperature of 110-120℃, cools for 30 minutes, and then performs a peel test on a tensile machine. If you choose a product with a thickness of 0.1mm, the above conditions are the same, and the corresponding peel force data is not less than 20N/25mm; if you use HN458A-06-04-10 to do a peel test under the above conditions, the corresponding peel force is not less than 20N/25mm.

It is suitable for bonding some types of plastics and metals. Good washing resistance, acid and alkali corrosion resistance, light yellow transparent film. Appearance: Colorless transparent or translucent film. Solubility: Insoluble in water. Number Melt Index:: 25±5g /10min (160℃*2.16kg)

Aluminum plate
This glue is widely used in the bonding of metal materials with its excellent corrosion resistance. Especially in the field of hot-melt adhesive compounding of aluminum plates, the bonding effect is very excellent. In addition, this glue can also be used for bonding some plastics and textiles.